JE TEGUH SDN BHD
No. 56, Jalan Timur,
Kawasan Perindustrian
Timur 1, 81000 Kulai,
Johor, Malaysia.
+6011-1050 4771
Electrical System Testing & Maintenance
| Previous | 2 / 6 | Next |
-
Electrical Protection Relay Calibration
- We provide protection relay calibration (Earth Leakage Relay, Overcurrent Earth Fault Relay, Residual Current Device, etc).
-
Calibration certificate will be issued with service engineer endorsement.
-
Thermal Imaging
-
Thermal imaging is a technique of using a non-contact & non-destructive Infrared Scanning Camera to detect invisible Infrared thermal radiation of objects, and recording these pictures as thermal images to assist in identifying potential equipment failures and avoid breakdown. This test detect poor connection, unbalanced load and deteriorated insulations.
-
Thermal imaging is a technique of using a non-contact & non-destructive Infrared Scanning Camera to detect invisible Infrared thermal radiation of objects, and recording these pictures as thermal images to assist in identifying potential equipment failures and avoid breakdown. This test detect poor connection, unbalanced load and deteriorated insulations.
-
Ultrasound Testing
-
Detect and identify partial discharge activities inside high tension electrical system. Also detects corona, tracking and arching.
-
Detect and identify partial discharge activities inside high tension electrical system. Also detects corona, tracking and arching.
-
Transformer & Switchgear Diagnostic
-
Successful operation of transformer and switchgear are dependent on proper installation, loading and maintenance. These diagnostic performed helps to determine equipment’s condition and choose the corrective measures.
-
Successful operation of transformer and switchgear are dependent on proper installation, loading and maintenance. These diagnostic performed helps to determine equipment’s condition and choose the corrective measures.
-
Power Quality Testing
-
The objective of this test is to record the power quality of a diesel generator or electrical system under various operating conditions. The data is then analyzed and compared to the relevant operating standards. Recommendation will be provided based on the results.
-
The objective of this test is to record the power quality of a diesel generator or electrical system under various operating conditions. The data is then analyzed and compared to the relevant operating standards. Recommendation will be provided based on the results.
JE TEGUH SDN BHD
56, Jalan Timur, Kawasan Perindustrian Timur 1, 81000 Kulai , Johor Darul Takzim, Malaysia.
+6011-1050 4771
jeteguh1@gmail.com